Items are stocked in our warehouses based on regional demand. If an item is not in stock at a local warehouse, additional charges may apply. GENERAL BOATING WATERSPORTS & bOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & aNODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & fISHING ANCHORING/ mOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE SAFETY 172 Item# Size 354-583422 10 3/4" x 10 3/4" Stamped Aluminum. Built in quick connect corner brackets. RADAR REFLECTOR Item# Size Color 960-EM180W 18.8" x 7.75" White Opt. Accy. Description 960-EM180MB SS Mast Mount Bracket EM180 RADAR REFLECTOR The EM180 has a documented maximum radar cross section of 8M2 and is suitable for vessels up to 7-8 meters. We have utilized the largest possible patented symmetrical stacked array with the smallest possible robust polyethylene case with minimum windage and weight. The EM180 is suitable for deck, mast mount fixing, or halyard suspension. Item# Size 960-EM230I 29.5" x 11.8" DuPont metallized, lacquered and spun bonded fabric array with PVC case. Folds down neatly to pocket size and is an ideal addition to the grab bag for emergency use. Can be mounted from halyards. Also suitable for dinghy or life raft use. EM230i INFLATABLE RADAR REFLECTOR Item# Size 960-EM230MW 18" x 9.8" Opt. Accy. Description 960-EM230MB SS Mast Mount Brackets, pr. EM230 MIDI RADAR REFLECTOR Medium sized Echomax radar reflector with a maximum 20M2 radar cross section is suitable for 8-15 meter sail boats, RIBs and motor cruisers. Suitable for mast, deck bracket or halyard suspension. Fully tested by QinetiQ. Exceeds RORC/ORC/WCC/ ISAF requirement of 10M2. Mast Mount Brackets Sold Separately. Item# Size Color 960-EM230W 24" x 9.8" White Opt. Accy. Description 960-EM230MB SS Mast Mount Brackets, pr. EM230 RADAR REFLECTOR Suitable for vessels 9 metres and above. Robust polyethylene case. The EM230 model has been successfully tested by QinetiQ to ISO 8729-1999, and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2. Used by the UK Military Forces and others throughout the world. Mast Mount Brackets Sold Separately. Item# Size Color 960-EM230MBM 17" x 9.8" White EM230 BASEMOUNT RADAR REFLECTOR EM230 base mount suitable for direct installation on wheel house roofs, RIB A frames or marker buoys. Robust 4 hole base fixing and supplied with fixing kit comprising of spacers to avoid over tightening and neoprene washers to absorb the shock of crashing down on waves at speed. Chosen by the RNLI as best reflector for their fleet of 400 RIB's. Light Not Included. Item# Model Size Color Rating 962-MOB401 S-2 2" x 22.5" Black 2 m2 Radar Cross Section 962-MOB402 S-2 2" x 22.5" White 2 m2 Radar Cross Section 962-MOB404 S-4 4" x 23" Black 4 m2 Radar Cross Section SAILBOAT RADAR REFLECTOR S-4 Black S-2 White S-2 Black Designed to be mounted in the rigging of sailboats. The best performance is achieved when the Mobri radar reflector is mounted in a vertical position as high as possible above the deck, a minimum of 13' is recommended. It should be mounted in the shrouds away from the "shadow" of the mast. Mounting eyes are molded in the structure at top and bottom. Item# Model Size Color Rating 962-MOB403 M-2 2" x 23" Black 2 m2 Radar Cross Section 962-MOB405 M-3 4" x 15" Black 3 m2 Radar Cross Section 962-MOB406 M-3 4" x 15" White 3 m2 Radar Cross Section 962-MOB407 M-4 4" x 23" Black 4 m2 Radar Cross Section POWERBOAT RADAR REFLECTOR M-4 Black M-3 White M-2 Black Designed with a mounting bracket it's most suitable for use on power boats. Best performance is achieved when mounted vertically as high as possible over the deck, away from the "shadow" of other equipment such as antennas. Easy to remove when not in use. Bells Item# Size Case 50-46021] 6" Dia. x 4" H 9 Hand polished cast triple chrome plated brass. Complete with removable bracket. Fasten with #6 screws. FOG BELL Item# Size Finish 354-455001 6" Chrome Brass 354-455720 8" Brass Constructed of improved cast brass. Meets Coast Guard, ABYC, and NMMA requirements for use on vessels 12m (39.4’) to 20m (65.6’) in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Brass Chrome Brass CAST POLISHED BRASS BELL Item# 958-WAP006000 • 6" Diameter (15.24 cm) • Polished cast brass • Brass bulkhead/wall slide-in mounting bracket • White, hand-tied, monkey fist lanyard • Made in Italy • Lifetime warranty 6" BRASS BELL WITH MONKEY FIST LANYARD Item# Size 958-WAP6060EN4006 9" x 12" This 6" brass bell, mounted on a high-gloss mahogany finish presentation plaque, is a distinctive way to acknowledge accomplishment in any field of endeavor. The white, hand-tied, monkey fist lanyard lends a nautical touch to the award. The accompanying brass plate can be engraved. 6" BRASS BELL ON MAHOGANY PLAQUE
RkJQdWJsaXNoZXIy MTI2MTky