Item Numbers in Red are hazardous items in blue are new v oversized d ups/fedex Surcharge u - WARNING Cancer Causing v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm Awnings & Accessories Campsite Living General Accessories Roofing & Sealants Sanitation Heating & Cooling Grilling & Campware Housewares Cleaners & Waxes Fresh Water Generator & Power Solutions Appliances Lighting Hardware Service & Maintenance Steps & Tiedowns Towing & Hitches Electrical Electronics Vents Carriers & Covers Jacks & Levelers LP Gas 771 Towing & Hitches Item# List 329-12750EV 23.39 EA Universal Converter application, Includes 4 wire flat extension, 60" long. Adhesive mount. TAIL LIGHT CONVERTER HEAVY-DUTY 60" Item# List 220-119250w 286.19 EA ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12 volt system only. • No cutting or splicing vehicle wiring • Isolates Trailer Lights from Tow Vehicle's System • Works with 2 or 3 wire systems • Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup • Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits • Works with low side switched vehicles • Integrated auto resetting short & overload protection • Robust design allows for interior or exterior mounting ZERO CONTACT UNIVERSAL MODULITE® Item# List 220-119130w 40.49 EA Tail light converter (black plastic housing) with 18" hook-up leads and 60" 4-flat car end connector. • Rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for tail light circuit • Adapts import & domestic vehicles with separate turn and stop lights (3 wire system) to standard trailer tail light wiring (2 wire system) • For either LED & Incandescent bulbs (vehicle & trailer) • Designed not to send feedback thru the vehicle circuits TAIL LIGHT CONVERTOR Item# List 220-119147w 71.69 EA • Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off • Will work with either LED/Incandescent bulbs (vehicle & trailer) • The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the convertor to turn on fully and gives the trailer lights full brightness during activation • The trailer brakes will override the hazard lamps when the brake is activated • The unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit • Will work with most vehicles that have a multiplex system for lighting • Can be used on a 2-wire or 3-wire system • Includes integrated protective cover MODULITE® TRAILER LIGHT POWER MODULE Brake Controllers Item# Description List 247-81725 Electronic Brake Controller 56.59 EA The Syncronizer is for trailers with 2 or 4 electric brakes. It requires no leveling and is preprogrammed to modulate and control power from the tow vehicle to the trailer brakes. The longer the brake pedal is depressed, the greater the amount of current delivered to the trailer brakes, until a preset brake power setting is reached. Comes with the exclusive Quik-Connect feature. Three-year warranty. SYNCRONIZER® BRAKE CONTROLLER Item# List 247-81760 73.69 EA The Engage has an output that operates on a time-based circuitry during braking. The longer the brake pedal is depressed, the greater the amount of current delivered to the trailer brakes. The voltage ramp time and power is adjustable to achieve trailer brake responsiveness. The digital display indicates the amount of power being sent to the trailer brakes and can be adjusted to display in three modes (percent of power, voltage, or current). The digital display also provides visual warning of several fault conditions, including current limit, short or open circuit, and hazard flash indicator. Easy-to-use manual slide operates independently of the power settings to allow full braking output when desired. Exclusive Quik-Connect feature. For 2, 4, or 6 electric brakes. Lifetime warranty. ENGAGE® BRAKE CONTROLLER Item# List 247-81742B 102.49 EA Energize III+® all electronic brake controller features a patented sensing device that automatically monitors and measures tow vehicle deceleration and applies the trailer brakes in direct proportion. It reacts instantly to any change in brake pedal pressure and ensures controlled, smooth stops. Trailer and tow vehicle stoplights operate automatically when the manual lever or trailer brakes are applied. • Proportional electronic controller • Combines the best of the Energize III and XPC into one unit • 3 axis accelerometer • Faster/smoother stopping performance with extra power and control • 100% braking power in manual mode • For medium and heavy duty trailers with 2, 4 & 6 electric brakes • Featuring Hayes Quik-Connect® Installation • Limited Lifetime warranty • Wide range of mounting positions and pendulum adjustability ENERGIZE III+ BRAKE CONTROLLER Item# List 247-81770 121.69 EA The Endeavor functions on its ability to sense deceleration of the tow vehicle during braking. An internal sensor measures the amount of deceleration and sends a proportional amount of power to the trailer brakes. It comes with our exclusive Quik-Connect feature that speeds installation. The initial turn-on voltage and maximum output are adjustable to provide superior trailer brake responsiveness. The digital display indicates the amount of power being sent to the trailer brakes and can be adjusted to display in three modes (percent of power, voltage, or current). For 2, 4, 6 and 8 electric/hydraulic brakes. Lifetime warranty. ENDEAVOR® BRAKE CONTROLLER Item# Application List 247-81780HBC 22.39 EA 247-81781HBC 22.39 EA 247-81795HBC 24.59 EA 247-81794HBC 20.09 EA 247-81783HBC 22.39 EA 247-81785HBC 22.39 EA 247-81789HBC Universal Harness (Hard Wire) 20.09 EA Installations are fast and easy. Simply snap together. No splicing required. See chart on next page for fitment. QUIK-CONNECT® OEM WIRING HARNESSES
RkJQdWJsaXNoZXIy MTI2MTky