GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm 932 SECTION ELECTRICAL Item# Volts Size List 969-720c(LK) 6-48 4" x 4" x 31/ 2" 124.59 EA 2 POSITION - ON/ OFF Heavy duty battery switch fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches. It is well suited to larger vessels and can be recess or surface mounted. Self cleaning sliding contact design. Rated at 600 amps continuous, 800 amps intermittent, and 2500 amps cranking. 720 CONTOUR HEAVY DUTY BATTERY SWITCH Item# Volts Size List 969-721c 6-48 4" x 4" 80.39 EA FOUR POSITIONS - 1-2 BOTH-OFF Heavy duty battery switch fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches. It is well suited to larger vessels and can be recess or surface mounted. Self cleaning sliding contact design. Rated at 350 amps continuous, 500 amps intermittent, and 1500 amps cranking. CONTOUR HEAVY DUTY BATTERY SWITCH Item# Type Size List 69-714140ADVSRc Single Engine 2 Battery Banks 513/ 32" x 23/ 4" 240.79 EA Switch system uses dual voltage sensing relays (VSR's) to ensure you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2, which is in isolation, will be charged via the VSR ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. DIGITAL VOLTAGE SENSING RELAY (VSR) BATTERY SELECTOR SWITCH Item# Size Type List 69-717140ADVSRc 5.4" x 8.2" Twin Engine/3 Banks 531.99 EA This system is designed for twin outboard installations using outboards without Aux outputs. It allows the port engine to charge the port start battery and the house battery when the port VSR is engaged. Also allows the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from 2 outboards into the house battery until the voltage regulators on both engines control the charge. Will also allow the house battery to be charged if running on one engine. TWIN OUTBOARD VOLTAGE SENSING RELAY (VSR) BATTERY DISTRIBUTION CLUSTER Contains House, Start & Emerg Parallel labels to fit battery switches 701-720. BATTERY SWITCH LABEL SET Item# Description List 969-SET715c(LK) Start, emerg parallel, and house battery labels 27.79 EA Item# Mount Volts Size List 969-701]c Surface or Recessed 6-48 23/ 4" x 23/ 4" x 3" 47.29 EA • Compact, lightweight • Removable key • Countersunk recesses for surface mount application • Standard 21/ 16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/ 16" (4.8 mm) nuts providing full access for cables with no restrictions • Standard interchange label system • Molded in high temperature, fiber reinforced plastics 701 SURFACE OR RECESS MOUNTED CONTOUR MANUAL BATTERY MASTER SWITCH Item# Mount Volts Size List 969-701S]c Surface or Recessed 6-48 23/ 4" x 23/ 4" x 3" 55.69 EA 969-701SPMc Panel Mount 6-48 23/ 4" x 23/ 4" x 3" 59.59 EA 4 POSITION - OFF/1/BOTH/2 The 701-S is the most compact selector switch available on the market. Housed in the same manner as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 701-S offers a simple economical way of separating two batteries. • Rated for 200 amps continuous, 300 intermittent, 1000 cranking • Panel mount version requires a standard 11/ 16" cut out 701-S MINI BATTERY SELECTOR SWITCH 701S 701SPM WAREHOUSE STOCKING LOCATION KEY (L) = Stocked in some or all warehouses located in: FL, GA, LA, MI, MN, MO, TX (K) = Stocked in some or all warehouses located in: CT, VA (W) = Stocked in some or all warehouses located in: CA, WA No Indicator = Stocked in All Three Regions
RkJQdWJsaXNoZXIy MTI2MTky