GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED d UPS/FEDEX SURCHARGE (L) = SE & MIDWEST ONLY (K) = NE & MID-ATLANTIC ONLY (W) = WEST COAST ONLY u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm SECTION 931 ELECTRICAL • Tinned copper 3/ 8" (10mm) studs • Stainless steel washers/nuts • 400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs Cranking • Waterproof to IP66 • Tested to UL1107 ignition protection, CE • Removable knob allows isolation during servicing • 3 removable sideplates for protection • Industry standard 3.85" x 3.85" footprint These revolutionary battery switches allow you to wire from the front. Installation and cabling is easy and accessible. With their shared interconnection height, EZMount battery switches cluster directly with the Pro Installer Busbar Range, resulting in the fast, compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches. PRO INSTALLER 400A EZ-MOUNT BATTERY SWITCH Item# Description Type List 969-770EZc Single Pole On/Off 83.89 EA 69-770DPEZOc(W) Double Pole On/Off 104.09 EA 69-771SEZc Selector 1-2, Both 93.49 EA 69-772DBCEZc Parallel 1, Both 116.99 EA Item# Description Type List 69-770c Single Pole On/Off 69.79 EA 69-770DPc Double Pole On/Off 91.59 EA A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/ feel, and are engineered from the finest materials to withstand the harsh marine environment. PRO INSTALLER 400A ON/OFF BATTERY SWITCH Item# Description Type List 69-771Sc Switch w/o AFD 1-2, Both 74.39 EA 69-771SFDc(KW) Switch w/AFD 1-2, Both 82.19 EA Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes. Note: 771-S is replacing 721. AFD=Alternator Field Disconnect PRO INSTALLER 400A SELECTOR BATTERY SWITCH Item# Description Type List 69-772DBCc(LK) Parallel 1, Both 96.89 EA This innovative (Patent Pending) switch combines the functions of 3 battery switches into one (House, Start, and Emergency Parallel) to intuitively manage 2 battery banks and 2 loads. A unique safety position isolates one load e.g. House On, Start Off in case of engine malfunction, so an emergency radio call can still be made. Significant savings in both space and installation cost can be made, without compromising functionality or safety. PRO INSTALLER 400A DUAL BANK BATTERY SWITCH Item# Volts List 969-700c(LK) 6-48 47.29 EA The 700 Easyfit™ possesses many of the features present in the 701 Contour Battery Master Switch and achieves ease of installation through varying thicknesses of panels with a removable threaded ring accommodating panel thicknesses up to (3/4"). Rated for 275 amps continuous, 1255 cranking. 700 EASYFIT™ BATTERY SWITCH Item# Mount Amps Volts Size List 69-701PMc Panel Mount 275 (Continuous) 17685 211/ 16"W x 211/ 16"H x 25/ 8"D 32.79 EA • Compact, lightweight • Removable key • Countersunk recesses for surface mount application • Standard 21/ 16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/ 16" (4.8 mm) nuts providing full access for cables with no restrictions • Standard interchange label system • Molded in high temperature, fiber reinforced plastics 2 POSITION - ON/OFF Panel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. The 701 offers a contour lock system, allowing it to be a stand alone unit or locked together with other switches. It also features a control knob which cannot be removed while in the ON or OFF position, however can be removed by switching to an anti-clockwise 45º position. The control knob also features an interchangeable labeling system allowing a full range of applications. A rear cover insulates the terminals against any short circuits and ensures the switch meets ABYC requirements. Tin plated copper studs & nuts. Rated for 275 amps continuous, 455 intermittent, 1250 amps cranking. 701 PANEL MOUNT CONTOUR MASTER BATTERY SWITCH Item# Type Size List 23-142337(LK) On/Off 2.17" × 2.17" 39.99 EA Compact, heavy-duty battery switch with removable control knob to deter theft. • 200 Amps Continuous / 300 Amps Intermittent / on-off-separate • Ergonomic grips • Removable walls for easy access BATTERY SWITCH
RkJQdWJsaXNoZXIy MTI2MTky