GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm 926 SECTION ELECTRICAL • Isolates electronics from electrical surges from starter & winch motors • Simple to install 3 wire connection, leaves alternator wiring intact • No voltage drop vs. diode isolators • Ignition protected • Surface or panel mountable The ignition protected Digital Voltage Sensing Relay can be surface or panel mounted and allows the charging of a second battery from a single charging source. When the voltage on the start battery rises to a level indicating a 60% charge, the VSR engages allowing the 2nd battery to charge. When charging stops and voltage falls the VSR will disengage isolating the two batteries from each other isolating the starting battery from the house bank. Dual sensing functionality enables the sensing of two battery banks allowing two way charging. DIGITAL VOLTAGE SENSING RELAY (VSR) Item# List 69-710140Ac 170.49 EA Item# Volts List 661-7610] 12/24V 188.39 EA (Start Isolation) Automatically manages the charging of two battery banks and isolates batteries during starting to protect sensitive electronics. 120 Amp continuous rating supports high-output alternators. LED light indicates when batteries are combined with option for remote indicator. Cover side and bottom breakouts for power cable connections. One-piece tin-plated copper stud design never loosens over time. SI SERIES AUTOMATIC CHARGING RELAY Item# Amps Volts List 661-7601] Continuous: 65, Intermittent 115 12/24V 130.59 EA Automatically combines two battery banks during charging and isolates batteries during discharge or starting to protect sensitive electronics. LED light indicates ACR states. Surface, rear, or front panel mounting options and a snap-on cover insulates terminal connections to prevent short circuits. M-ACR AUTOMATIC CHARGING RELAY Item# Amps Volts List 661-7611] 120 12V/24V DC 156.99 EA • Senses charging on two battery banks • Side and bottom knockouts for cable connections • Clip-on cover insulates terminal connections • Studs accept multiple cable terminals • One-piece stainless flange nuts ensure safe and secure connections • Integrated LED indicates ACR status • Quick connect terminals for ground and optional features Specifications: • 210A Intermittent, 120A Continuous • (Combine) Amperage Operating Current: 175mA • (Open) Amperage Operating Current: 15mA • Cable Size to Meet Ratings: 1 AWG • Maximum Cable Size: 1/ 0 AWG • Terminal Stud Size: 3/ 8"-16 (M10) • Maximum Battery Size: 850 CCA with optional Auxiliary Battery Priority Automatically shares single source of charge with Auxiliary Battery BATTERYLINK® ACR AUTOMATIC CHARGING RELAY Item# Volts List 661-7622 12VDC w/ manual override 348.89 EA Opt. Accy. Description List 661-9160 Paralleling link bus 29.99 EA 500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine. Start Isolation (SI) can be configured for temporary isolation of House loads from Engine circuit during engine cranking. Engine Isolation (EI) can be configured for isolation of two engines while both are running to maximize alternator output. Manual override knob provides an added level of safety. • Draws very low current in the ON state • Senses charging on two battery banks • Label recesses for circuit identification • Silver alloy contacts provide high reliability • Includes Remote Control Contura Switch (2146) ML SERIES AUTOMATIC CHARGING RELAY Battery Isolators and Voltage Sensitive Relays Item# Amps Size List 684-DDC1224(K) 30 4.8" x3.2" x1.5" 324.00 EA The DDC-12/24 offers the smartest system yet for current and voltage controlled charging between the house and starting batteries eliminating the need for an isolator or battery switches. During charging, the Duo Charge monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13V in a 12-volt system and 26V in a 24-volt system), the Duo Charge automatically engages, providing up to 30 amps to the starting battery. When no charge source is present, the Duo Charge separates the batteries, so the starting battery won't be accidentally discharged. 4 program presets: (Gel, AGM, Std. Fld., FDC) DIGITAL DUO CHARGE WAREHOUSE STOCKING LOCATION KEY (L) = Stocked in some or all warehouses located in: FL, GA, LA, MI, MN, MO, TX (K) = Stocked in some or all warehouses located in: CT, VA (W) = Stocked in some or all warehouses located in: CA, WA No Indicator = Stocked in All Three Regions
RkJQdWJsaXNoZXIy MTI2MTky