GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED d UPS/FEDEX SURCHARGE (L) = SE & MIDWEST ONLY (K) = NE & MID-ATLANTIC ONLY (W) = WEST COAST ONLY u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm ELECTRONICS 55 Item# Model Fits Cable List 152-T70319(K) RV-220 14° - 26° Deadrise 33' 2334.95 EA Includes: • Bronze Port Transducer • Bronze Starboard Transducer • 33' Total Cable Length • Anti-Rotation Bolt Kit A 4-channel, Wide Spectrum CHIRP depth/temp transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. Contains a built-in attitude and heading reference system (AHRS) to automatically compensate for vessel motion. You'll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The low-profile design slips through the water without drag or cavitation. The near-flush system works great on trailered boats too. Rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. RV-212 w/12° Compensation for deadrise angles from 6°-18° RV-220 w/20° Compensation for deadrise angles from 14°-26° RV-212/RV-220 BRONZE EXTERNAL THRU-HULL TRANSDUCER Item# Model Fits Cable List 152-T70320(LK) RV-312 6° - 18° Deadrise 33' 1971.95 EA Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. A 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. Built-in attitude and heading reference system (AHRS) stabilizes the sonar imagery, automatically compensating for vessel motion. You'll enjoy crystalclear imagery in waves, swells, and while maneuvering. Includes a fast response water temperature sensor. Rugged plastic bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Kit Includes: Port & Starboard Transducers with 2-meter cables, Y-Cable, 8-meter (26') Transducer Extension Cable and Anti-rotation bolt kit. RV-312 REALVISION™ 3D PLASTIC THRU-HULL PACK Item# Model Cable List 152-A80351(LK) CPT-100DVS 33' 164.95 EA Raymarine's exclusive line of DownVision transducers pair a conical CHIRP fishfinding element with a wide beam DownVision element. The result is an unrivaled level of subsurface visibility. Compatible with a68, a78, a98 & a128 multifunction displays. • Max Depth (Ft): DV=600 | FF=900 • Beam Width (L/H): 25°/60° • Records: Depth / Temperature • Approved Hull Material: Fibreglass / Wood / Metal • Deadrise: 0-90° Transom • Replaces: A80270 TRANSOM MOUNT DOWNVISION TRANSDUCER Multisensor features a 50/ 200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing reduces turbulence under the face for accurate high-speed readings and clear images. Compatible with i40/i50 instuments. P66 TRANSOM MOUNT TRIDUCER Item# Description List 152-E26028PZc(LK) Depth/Speed/Temp 236.95 EA • 235 kHz frequency • 6m (20’) NMEA 2000 cable • Devicenet connector • No holes to drill • Installation can be done in the water • Recommended for solid fiberglass hulls • Epoxies to aluminum hulls under 0.38 mm (0.150”) thick • Easily adapts to deadrise angles up to 22° Compatible with: ST40/ST60/i40/i50 on SeaTalk1 and i50 on STng - operate as repeaters only Note: a SeaTalk to SeaTalkng converter may be required. ST70, ST70+ and i70 on the SeaTalkng network are required for calibration P795S SMART™ TRANSDUCER Item# Description List 152-A80373c(LK) P79S Smart™ In-Hull Transducer 385.95 EA 152-T70278c(LK) P79S Smart™ In-Hull Transducer w/SeaTalkng Adapter 401.95 EA Item# Description List 152-E22079(LK) with 162.50' (50m’) Cable 699.95 EA Long arm wind, speed and angle tranducer compatible with i60, ST60 and ST60+ instruments. LONG ARM VANE TRANSDUCER • Solar-Powered w/ 300 Hours Autonomy • Waterproof (submersible to 10m) • Simple Three-screw Attachment • Sends Data Via Wireless Link • Full Calibration Via Displays The Raymarine T120 is a wireless wind transmitter for micronet displays. A typical installation can be done in just a few hours, with your rig in place and your boat still in the water. And there's no need for holes in the bulkhead or wires down the mast. The elimination of wires in the mast not only reduces spar weight but also lowers the boat's centre of gravity, giving significant and immediate performance advantage. Using clip-in cradles, your display can be placed anywhere on your boat, allowing you to view the information where and when you need it. WIRELESS WIND TRANSDUCER Item# List 152-T120(K) 822.95 EA Item# List 152-T70134 123.95 EA Kit includes: • A06031: SeaTalkng Backbone Terminator (x2) • A06064: SeaTalkng 5-way Connector • A06040: SeaTalkng Spur Cable 3m • A06049: SeaTalkng Power Cable SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. As your Raymarine system expands, so can your starter kit. Additional backbone cables, plugs and sockets can be added so you can connect more products via spur cables. SEATALKng STARTER KIT
RkJQdWJsaXNoZXIy MTI2MTky