GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED d UPS/FEDEX SURCHARGE (L) = SE & MIDWEST ONLY (K) = NE & MID-ATLANTIC ONLY (W) = WEST COAST ONLY u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm SECTION 473 ANCHORING/MOORING J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/ 4", 3/ 8" and 1/ 2" chain. 5"L x 5"H. J. CHAIN RETAINER Item# Description List 241-26529a(KW) Standard Grade 62.49 EA 241-26410a(LK) Commercial Grade 78.99 EA K. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set "M" required for attaching. K. PIPE HOLDER/OUTSIDE 3" Item# Description List 241-24280a(LK) Standard Grade 63.79 EA 241-26411a Commercial Grade 65.59 EA N. Includes lock nut. Used to connect male and female connectors. Galvanized 3/ 4" x 31/ 2". N. HEX HEAD BOLT SET Item# List 241-24279a(K) 66.19 BG P. Used for quick disconnect of male and female connectors. Galvanized 3/ 4" connector pin and hitch clip pin. P. CONNECTOR PIN SET Item# List 241-26531a(K) 17.49 EA Q. Reinforcing plates are used to back up single T males and females. 5" x 5". Q. BACK UP PLATE Item# Size List 241-26413a(KW) 5" x 5" 12.69 EA Item# Description List 241-26412a(K) Commerical Grade 185.19 EA R. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 11/ 2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate. R. PILING HOOP Item# Description Size List 241-26429a Commercial Grade w/4" radius for 8" Piles 14"x3" 52.79 EA 241-26391a(KW) Commercial Grade w/5" radius for 10" Piles 16"x3" 56.39 EA 241-26394a(LK) Commercial Grade w/6" radius for 12" Piles 18"x3" 63.49 EA 241-26393a(K) Commercial Grade w/7" radius for 14" Piles 20"x3" 90.49 EA Heavy duty 1/ 4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). PILING HOOP Item# List 241-26415a(K) 411.99 EA Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter. Bracket and roller bolt directly to an optional deck plate (26416). S. PILING HOOP AND ROLLER Item# Description Size List 241-26414a Commercial 101/ 2" x 2" 130.39 EA Heavy duty roller assembly. An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/ 8" diameter shaft. 3/ 4" bracket is hot-dipped galvanized. Bracket and roller bolt directly to an optional deck plate (26416). T. ROLLER ASSEMBLY Item# Description Size List 241-26416a(K) Commercial 221/ 2"L x 4"W x 6"H 143.39 EA Heavy duty deck plate for use with Piling Hoop. This 3/ 16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally. DECK PLATE Item# Description Size List 241-26434da(K) Commercial Grade 24" x 24" x 715/ 16" 441.59 EA Commercial grade. Heavy duty 1/ 4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 715/ 16". INTERNAL PILE HOLDER Item# List 241-26423a(LK) 363.29 EA Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement. 22.5" Width. 14" HOOP ROLLER PILE HOLDER
RkJQdWJsaXNoZXIy MTI2MTky