GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm 1640 SECTION FUEL Item# I.D. O.D. Length List 50-23744 1/ 4" .627" 25' 149.99 EA 50-23746 1/ 4" .627" 50' 168.29 EA 50-23747 5/ 16" .725" 25' 98.39 EA 50-23748 5/ 16" .725" 50' 175.39 EA 50-23749 3/ 8" .658" 25' 101.39 EA 50-23751 3/ 8" .658" 50' 179.89 EA 50-23750 3/ 8" .658" 250' 841.19 EA 50-23741 1/ 2" .890" 25' 137.79 EA 50-23743 1/ 2" .890" 50' 236.59 EA Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C). TYPE A1/B1-15/10 LOW-PERMEATION FUEL HOSE - 365 SERIES Item# Length I.D. List 710-32-8M0038500 100' 5/ 16" 349.99 EA 710-32-8M0038563 100' 3/ 8" 464.99 EA No primer bulb or ends. BULK FUEL LINE Item# I.D. Length List 88-3370143c(KW) 1/ 4" 10' 97.89 EA 88-3370146c 1/ 4" 50' 327.19 EA 88-3370563c(KW) 5/ 16" 10' 106.49 EA 88-3370565c 5/ 16" 25' 194.09 EA 88-3370566c 5/ 16" 50' 332.79 EA 88-3370560(L) 5/ 16" 250' 1445.09 EA 88-3370383c 3/ 8" 10' 110.59 EA 88-3370385c 3/ 8" 25' 196.29 EA 88-3370386c 3/ 8" 50' 333.29 EA 88-3370380(L) 3/ 8" 250' 1455.99 EA Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15. SILVERADO 4000 TYPE B1-15 OUTBOARD FUEL LINE Item# I.D. O.D. Length Working Pressure Pkg. List 88-3690583c 5/ 8" 31/ 32" 10' 50# Polypac 121.09 EA 88-3690585c 5/ 8" 31/ 32" 25' 50# R/O Carton 279.99 EA 88-3690586c 5/ 8" 31/ 32" 50' 50# R/O Carton 490.89 EA Meets USCG SAE J1527 Type A2 Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). It meets USCG Type A2 requirements for pleasure boats. Meets SAE J1527 Type A2, ISO 7840 Type A2 and NMMA/CE Type accepted standards. Temperature range -20°F to 160°F. TYPE A2 FIRE-ACOL FUEL VENT HOSE - SERIES 369 Item# I.D. O.D. Length Working Pressure List 88-3680145c 1/ 4" 35/ 64" 25' 100# 196.19 EA 88-3680146c 1/ 4" 35/ 64" 50' 100# 345.69 EA 88-3680563c(LK) 5/ 16" 5/ 8" 10' pack 100# 103.99 EA 88-3680565c 5/ 16" 5/ 8" 25' 100# 202.19 EA 88-3680566c 5/ 16" 5/ 8" 50' 100# 360.39 EA 88-3680383c 3/ 8" 11/ 16" 10' 100# 105.39 EA 88-3680385c 3/ 8" 11/ 16" 25' 100# 208.19 EA 88-3680386c 3/ 8" 11/ 16" 50' 100# 369.59 EA 88-3680380 3/ 8" 11/ 16" 250' 100# 1708.59 EA 88-3680125c 1/ 2" 13/ 16" 25' 100# 283.19 EA 88-3680126c 1/ 2" 13/ 16" 50' 100# 485.99 EA SAE J1527 Type A1-15 Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/ UV resistant. This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels, diesel, all bio-diesel blends). It meets USCG Type A1 - 15 requirements for pleasure boats. Temperature ranges from -20°F to 212°F. 2 year emission performance warranty. TYPE A1-15 LOW PERMEATION FUEL HOSE - SERIES 368 Item# Type I.D. Length Case List 50-21231 B1-15 5/ 16" 50' 10 148.39 EA 50-21221 B1-15 3/ 8" 50' 10 178.19 EA Type B1-15. ISO 8469 Used for repair and replacement on outboard engines. • Complies with SAE J1527 • Class 1 and CE requirements. • Meets new EPA requirements for low permeation hose FUEL HOSE EPA COMPLIANT Item# I.D. O.D. Length OEM# List 50-23711 11/ 2" 17/ 8" 10' MPI# 350-1123 166.49 EA 50-23712 11/ 2" 17/ 8" 121/ 2' MPI# 350-1124 200.09 EA 50-23713 11/ 2" 17/ 8" 25' MPI# 350-1125 427.79 EA 50-23714 11/ 2" 17/ 8" 50' MPI# 350-1126 713.69 EA 50-23715 2" 23/ 8" 10' MPI# 350-2003 237.59 EA 50-23716 2" 23/ 8" 121/ 2' MPI# 350-2004 295.59 EA Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C). TYPE A2 HARDWALL SINGLE WIRE FUEL TANK FILL HOSE - 350 SERIES Fuel Hose Item# I.D. O.D. Length List 50-23704 5/ 8" 1" 10' 58.89 EA 50-23706 5/ 8" 1" 25' 136.29 EA 50-23707 5/ 8" 1" 50' 238.99 EA Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C). TYPE A1 FUEL TANK AND FEED HOSE - 350 SERIES
RkJQdWJsaXNoZXIy MTI2MTky