GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm 1030 SECTION ELECTRICAL Item# Positions List 969-1001606c Off/Ignition/Start 41.59 EA • Coded tumbler lock, includes two keys • Weather resistant key slot and boot • Nominal voltage is 12V DC • ignition: 10A at 12V DC and start: 5A at 12V DC • #8-32 screw terminals • Fits panels up to 1" thick • Replaces Cole Hersee part number M-550-14 Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. 3 POSITION IGNITION SWITCH • Nominal voltage is 12V/24V DC • Rated for 10A at 12V DC, 5A at 24V DC • Fits panels up to 3/ 8" thick • Replaces Cole Hersee #95060-60 Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259. 3 POSITION IGNITION SWITCH Item# Positions List 969-1001604c Off/Ignition & Accessory/Start 46.99 EA Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. • Coded tumbler lock, includes two keys • Nominal voltage is 12V DC • Ignition: 10A at 12V DC and start: 5A at 12V DC • #8-32 screw terminals • Fits panels up to 1" thick • Replaces Cole Hersee part number M-550 3 POSITION IGNITION SWITCH Item# Positions List 969-1001607c Off/Ignition & Accessory/Start 35.59 EA Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. • Coded tumbler lock, includes two keys • Accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC • Nominal voltage is 12V DC • #8-32 screw terminals • Fits panels up to 1" thick • Replaces Cole Hersee part number M-712 4 POSITION IGNITION SWITCH Item# Positions List 969-1001609c Accessory/Off/Ignition & Accessory/Start 35.69 EA • Nominal voltage is 12V/24V DC • Rated for 10A at 12V DC, 5A at 24V DC • Fits panels up to 3/ 8" thick • Replaces Cole Hersee part number 95060-50 Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. 4 POSITION IGNITION SWITCH Item# Positions List 969-1001603c(LK) Accessory/Off/Ignition & Accessory/Start 65.89 EA Item# Max Panel Terminals Boot Pkg. List 12-M850BPc 7/ 8'' 3 screw Yes Retail 67.69 EA • Off-Ign-Ign. & Start • Spring return to Ignition position after starting • Key removable in OFF position only • Ratings: 12V, D.C.Ignition: 5A • Brass with brass mounting hardware • Weather resistant rubber boot and mounting nut assembly for protection with or without key engaged • Mounting stem 13/ 16"-24, 17/ 32" L" Item# Max Panel Terminals Boot Pkg. List 12-M550BPc 1" 3 screw No Retail 80.19 EA 12-M55014BPc 1'' 3 screw Yes Retail 109.19 EA Item# Max Panel Terminals Boot Pkg. List 12-M712BPc 1'' 4 screw No Retail 106.39 EA Item# Terminals Pkg. List 12-9579BPc 4 screw Retail 76.89 EA Item# Max Panel Terminals Boot Pkg. List 12-M700c 1/ 4" 4 screw No Bulk 110.09 EA Allows entry of key. Adds a level of weather-resistance to ignition switches. Provides protection from moisture, dirt, salt, etc. Chrome-plated brass knurled nut. Used on switch #'s M50014 & M71209. Fits any ignition switch with 13/ 16''-24 mounting stem. Item# Pkg. List 12-83288BPc Retail 20.39 EA Four position: Acc - Off - Ign/Acc - Ing/Start. Die cast zinc housing w/aluminum adapter face nut. Fits 3/47/ 8" hole. 4 brass screw terminals. Rating at 12V: 5A ignition, 5A start, 10A accessory. IGNITION SWITCH WEATHER RESISTANT RUBBER BOOT AND MOUNTING NUT Standard body series is designed for universal applications within harsh environments. Acc/Off/Acc-Ign/Start without spring return or anti-restart. Key is removable in “Off" Position Only (where applicable). 4 screw terminals, zinc diecast housing. Face nut mount through 0.75" (19mm) 20 Panel Hole. 5A @ 12V DC (Start), 10A@12V DC (Acc, Ign/Run) 4 POSITION KEY IGNITION SWITCH 4 Positions: Acc - Off - Ign/Acc - Ign/Start. Brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/ 16" - 24 x 17/ 32". Fits panels up through 1" thick. 4 brass screw terminals. Rating at 12V: 5A ignition, 5A start, 10A accessory. 3 POSITION ACCESSORY/IGNITION/STARTER SWITCH 3 POSITION IGNITION/STARTER SWITCH Spring return from start to run. Heavy grade impact plastic body. Plastic boot at key end gives extra weatherresistance. Installs in panels with 7/ 8'' dia. hole. Rating at 12V: 15A ignition, 5A start. 3 POSITION IGNITION STARTER SWITCH Item# Max Panel Terminals Boot Pkg. List 12-M489BPc 1'' 2 Screw No Retail 99.09 EA Two positions: off/on(ignition). Two screw terminals, brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/ 16"-24 in diameter, 17/ 32" long. Rating at 12V: 10 amps. 2 POSITION IGNITION SWITCH
RkJQdWJsaXNoZXIy MTI2MTky