GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED d UPS/FEDEX SURCHARGE (L) = SE & MIDWEST ONLY (K) = NE & MID-ATLANTIC ONLY (W) = WEST COAST ONLY u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm SECTION 601 TRAILERING Item# Lens Size List 177-V153KAc Amber / Kit 27/ 8" x 11/ 2" 12.09 EA 177-V153KRc(KW) Red / Kit 27/ 8" x 11/ 2" 12.09 EA Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug. 153 PIRANHA® LED CLEARANCE / SIDE MARKER LIGHT Item# Description List 220-4758031c(LK) #58 Red LED Clearance Light 19.59 EA LED oblong clearance/side marker light with snap lock base mount. With pigtail. 4" x 2" x 1". Packaged LED CLEARANCE/SIDE MARKER LIGHTS Red Compact, surface mount design LED clearance, side marker or identification light. Features sonically sealed, waterproof lens and housing in a single unit. Two-wire design includes both lead and ground wire for mounting to all surfaces .046 Amps. Lifetime LED Warranty. Item# Lens Size Pkg. Case List 158-MCL13A2BPc Amber - 2 Diodes 21/ 2" L x 11/ 16" H Polypack 20 10.19 EA 158-MCL13R2BPc(LK) Red - 2 Diodes 21/ 2" L x 11/ 16" H Polypack 20 10.19 EA MCL13A2BP MCL13R2BP MINI SEALED LED MARKER/CLEARANCE LIGHT Item# Description Size Pkg. Case List 158-AL90ABPb Amber - 1 Diode 21/ 2" x 11/ 4" x 1" D Polypack 50 6.69 EA 158-AL90RBPb Red - 1 Diode 21/ 2" x 11/ 4" x 1" D Polypack 50 6.69 EA Opt. Accy. Description List 158-A91GBPc Flush mount grommet for mini sealed lights 2.99 EA Fleet Count™ single diode design provides a DOT compliant, economical LED light. Features sonically sealed, waterproof lens and housing in a single unit. Accepts standard 1- or 2-wire plugs for easy retrofit of incandescent lights. Single wire design grounds through mounting hardware. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. FLEET COUNT™ MINI THIN LINE SEALED LED MARKER/ CLEARANCE LIGHT AL90ABP AL90RBP Fleet Count™ two-diode design provides a DOT compliant, economical LED light. Feature sonically sealed, waterproof lens and housing in a single unit. Lens design optimizes light output. Accepts standard 1- or 2-wire plugs for easy retrofit of incandescent lights. Single wire design grounds through mounting hardware. Two-wire design includes both lead and ground wire for mounting to all surfaces. Lifetime LED Warranty. Item# Description Size Pkg. Case List 158-MCL61ABPc Amber -2 Diodes 4" x 1.25" x 1" D Polypack 20 8.69 EA 158-MCL61RBPc(K) Red -2 Diodes 4" x 1.25" x 1" D Polypack 20 8.69 EA Amber Red FLEET COUNT™ THIN LINE SEALED LED MARKER/ CLEARANCE LIGHT Reflectors Item# Lens Size Qty Case List 177-E483Ac Amber 31/ 8" x 13/ 8" 2 6 4.19 PK 177-E483Rc Red 31/ 8" x 13/ 8" 2 6 4.19 PK Mounts on clean, flat surfaces using an industrial strength adhesive. PLASTIC REFLECTOR E483A E483R Item# Size Qty List 177-4654Kb 2" W x 18" L 4 13.69 PK 177-465Kb(L) 2" W x 18" L 8 29.39 PK High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflectivity, wider viewing angles, higher visibility at long range and tougher durability than conventional conspicuity reflectors. REFLECTIVE MARKING TAPE Back-Up Light Kit Item# Description List 177-416Kc Clear kit 23.29 BG Sealed, oval back-up light meets DOT requirements in either horizontal or vertical position. Polycarbonate lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plug to complete installations. Kit includes light, grommet, and right angle plug. 12-volt lamps designed with single filament, 2.1 amp, 32 cp bulb. BACK UP LIGHT KIT Item# Size List 158-BUL10CBPb 61/ 2" W x 23/ 8" H x 13/ 4" D 43.49 EA • Sonically sealed, waterproof • Certified for back-up light function when installed as pair in two-lamp system [SAE (2)R] • Low diode count 10-LED model • Accepts standard two-pin plugs • Lifetime LED Warranty CLEAR LED BACK UP LIGHT License Plate Brackets and Accessories MACHINE SCREWS AND NUTS FOR LICENSE PLATE Item# Size Qty Case List 50-59923c 1/ 4"-20 4 10 3.49 BG Item# Case List 50-51811 12 2.99 EA • Black heavy duty plastic, corrosion-proof • Universal Application • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed This Universal License Plate Bracket must be installed on the rear of the vehicle or trailer. LICENSE PLATE BRACKET
RkJQdWJsaXNoZXIy MTI2MTky