ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. - WARNING Cancer Causing See www.P65Warnings.ca.gov - WARNING Reproductive Harm - WARNING Cancer and Reproductive Harm See www.P65Warnings.ca.gov 132 ADAPTERS & CONNECTORS Item# List 220-119130 40.49 EA Tail light converter (black plastic housing) with 18" hookup leads and 60" 4-flat car end connector. • Rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for tail light circuit • Adapts import & domestic vehicles with separate turn and stop lights (3 wire system) to standard trailer tail light wiring (2 wire system) • For either LED & Incandescent bulbs (vehicle & trailer) • Designed not to send feedback thru the vehicle circuits TAIL LIGHT CONVERTOR Item# List 220-119147 71.69 EA • Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off • Will work with either LED/Incandescent bulbs (vehicle & trailer) • The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the convertor to turn on fully and gives the trailer lights full brightness during activation • The trailer brakes will override the hazard lamps when the brake is activated • The unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit • Will work with most vehicles that have a multiplex system for lighting • Can be used on a 2-wire or 3-wire system • Includes integrated protective cover MODULITE® TRAILER LIGHT POWER MODULE Trailer Connectors Item# Connector Lead Case List 50-13841 2 Pole 12" on each side 12 5.89 EA Corrosion resistant construction. For 6, 12 and 24 volt applications. 7A @ 12V. MOLDED LINE CONNECTOR Item# Description Lead Case List 50-57841 Car Side, for 2-Wire Systems 48" 6 7.89 EA 50-57931 Car & Trailer Side Loop 60" 6 12.59 EA 50-57851 Trailer Side 12" 6 7.09 EA 50-57971 Trailer Side w/Separate Tail Light Wires 24" 6 8.49 EA 50-57901 Trailer Side 48" 6 8.19 EA Industry standard connector used for most light-duty applications including RV, marine & utility trailers where electric brakes or other additional power demands are not required. • 18 Ga. Bonded Wire • Tin Plated .187 Terminals for Improved Current Capacity and Corrosion Resistance • Flexible Molded PVC Connectors • 7.5 Amp Max Load • Contains: Harness, Attachment Hardware, Detailed Wiring Instruction 4-WAY FLAT CONNECTORS 57901 57971 57931 57841 Item# Description Case List 50-13871 Flat Body Set 12 9.89 EA 50-13891 Trailer Side Connector, Flat Male 12 6.19 EA 50-13901 Car Side Connector, Flat Female 12 7.49 EA For 6, 12 & 24 volt applications. 13871: 4 Pole shrouded connector. Set consists of: one 12" color coded lead wire to trailer side and one 12" color coded lead wire to car side. 13891: 4 Pole shrouded connector, trailer side. 12" color coded lead wire. 13901: 4 Pole square shrouded connector, trunk side. 48" color coded lead wire. TRAILER CONNECTOR - 4 PIN 13901 13891 13871 Item# Connector Lead Case List 50-57871 Car 48" 6 11.79 EA 50-57961 Car & Trailer 60" 6 10.79 EA 50-57881 Trailer 12" 6 8.49 EA Industry standard connector used for light-duty applications where an auxiliary circuit is required for surge brake lockout or back-up lamp functionality. • 16 Ga. Bonded Wire (Green, Yellow, Brown, White) • 16 Ga. Single Wire (Blue) • Tin Plated .187 Terminals for Improved Current Capacity and Corrosion Resistance • Flexible Molded PVC Connectors • 7.5 Amp Max Load • Contains: Harness, Detailed Wiring Instructions 5-WAY FLAT CONNECTOR 57881 57961 57871
RkJQdWJsaXNoZXIy MTI2MTky