2022 Sea Value - Canada

KEY: Blue Item # =New | Red Item # =Hazardous | vOversize |dUPS/FEDEX Surcharge 141 Electrical Item# 232-NBH31SSCOPT BATTERY HOLDER TRAY FOR OPTIMA® BATTERIES Item# Fits 232-DBH27PDP Group 27 DUAL GROUP 27 BATTERY TRAY Battery Switches & Isolators Item# Size 50-11553 5 1/2" Dia. x 2 5/8" •  For 6, 12, 24 or 36 volt systems •  230 Amps continuous, 345 amps momentary (5 minutes) •  Surface or rear mount •  Conforms to US Coast Guard standards for ignition protection •  Positive click-stop on all positions •  Durable marine-grade polycarbonate case •  60% larger ‘sweep’ contact area for improved performance and longer switch life •  Cable Lug Size: 3/8" •  Fits most competitors mounting hole patterns 2-POSITION BATTERY SELECT SWITCH WITHOUT LOCK Item# Size 50-11561 4" x 4" x 3 1/8" With removable side panels for easy wiring. Ignition protected. Use as main disconnect switch. Red plastic housing with large black plastic knob. For use with systems under 50V - 315A continuous / 450A intermittent. Made in the USA. COMPACT MAIN BATTERY SWITCH Item# Size 50-11531 4" x 4" x 3 1/8" With removable side panels for easy wiring. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 315A continuous / 450A intermittent. Made in the USA. COMPACT BATTERY SELECTOR SWITCH Item# Size 50-11504 5 1/2" Dia. x 2 5/8" •  Permits selection between two batteries for starting, charging, or operating both batteries in parallel •  For 6, 12, 24 or 36 volt systems •  230 Amps continuous, 345 amps momentary (5 minutes) •  Surface or rear mount •  Conforms to US Coast Guard standards for ignition protection •  Positive click-stop on all positions •  Durable marine-grade polycarbonate case •  60% Larger ‘sweep’ contact area for improved performance and longer switch life •  Cable lug size: 3/8" •  Fits most competitors mounting hole patterns 4-POSITION BATTERY SELECT SWITCH WITHOUT LOCK •  Shaped inserts fit both Optima®D27M and D31M series •  Rugged poly tray with 8 mounting slots •  Poly strap with stainless steel buckle •  Resistant to UV and corrosion Dual Group. Holds two Series 27 deep cycle batteries side by side. Patented poly strap with quick release buckle. Meets all NMMA specs for battery retention. 14 1/2" L x 13 1/8"W x 1" H. Item# Size 50-11551 5 1/4" Dia. x 2 5/8" Ignition protected. Use as main disconnect switch. Red plastic housing with large black plastic knob. For use with systems under 50V - 250A continuous / 360A intermittent. Made in the USA. MAIN BATTERY SWITCH Item# Size 50-11501 5 1/4" Dia. x 2 5/8" Ignition protected. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 250A continuous / 360A intermittent. Made in the USA. 4-POSITION BATTERY SELECTOR SWITCH •  Compact, lightweight •  Removable key •  Countersunk recesses for surface mount application •  Standard 2 1/16" (52 mm) hole cut out (same as standard gauge hole) •  Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions •  Standard interchange label system •  Molded in high temperature, fiber reinforced plastics 4 POSITION - OFF/1/BOTH/2 The 701-S is the most compact selector switch available on the market. Housed in the same manner as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 701-S offers a simple economical way of separating two batteries. •  Rated for 200 amps continuous, 300 intermittent, 1000 cranking. •  Panel mount version requires a standard 1 1/16" hole cut out. Item# Mount Volts Size 969-701 Surface or Recessed 6-48 2 3/4" x 2 3/4" x 3" 701 SURFACE OR RECESS MOUNTED CONTOUR MANUAL BATTERY MASTER SWITCH Item# Mount Volts Size 969-701S Surface or Recessed 6-48 2 3/4" x 2 3/4" x 3" 701-S MINI BATTERY SELECTOR SWITCH

RkJQdWJsaXNoZXIy MTI2MTky