2022 Sea Value - Canada

116 Plumbing Item# GPH Hose Volts Amps 29-RM500B 500 3/4" 12 1.8 29-RM800B 800 3/4" 12 3.0 29-RM1100B 1100 1 1/8" 12 3.8 Item# Rule_HalfVert* RuleMate Automatic Bilge Pump The Next Generation of RuleMate Bilge Pumps • Automatic water level sensing • 500, 800, 1100 GPH (10% higher flow) • All models supplied with back flow prevention • Built in thermal cut out to protect pump and vessel • Anti-airlock protection • RuleMate models feature a safety back-up operating mode NEW Item# GPH Hose Volts Fuse Size 29-RM500B 500 3/4” 12 4A 29-RM800B 800 3/4” 12 5A 29-RM1100B 1100 1” & 1 1/8” 12 7.5A Visit our website xylem.com/rule © 2019 Xylem Inc. Rule is a trademark of Xylem, Inc. or one of its subsidiaries. Item# GPH Hose Volts Amps 29-24DA 360 3/4" 12 2.1 29-25DA 500 3/4" 12 1.6 29-20DA 800 3/4" 12 3.4 29-27DA 1100 1" & 1 1/8" 12 3.7 SUBMERSIBLE BILGE PUMPS Item# Description GPH Volts 29-LP900S Fully automatic pump 900 12 LOPRO™ BILGE PUMP Item# GPH Hose Volts Amps 29-25SA 500 3/4" 12 1.9 29-27SA 1100 1" & 1 1/8" 12 3.3 ROUND AUTOMATIC BILGE PUMPS •  Higher Flow optimized impeller to provide greater flow at the same amperage •  Built-in Thermal Cut-Off (TCO) •  Back Flow Prevention reduces the amount of water left over in the bilge •  Hidden Air Vents in the Body helps prevent air locking •  Threaded Discharge for easier installation & maintenance LoPro™ LP900S has two automated settings, enabling the pump to turn on when the water reaches either 1" or 1 3/4". In addition, the electronic automatic mode allows the pump to check for water every 2 1/2 minutes. If water is detected, the pump stays on until the water is removed. If no water is detected, then the pump turns off. Ignition protected, submersible, double insulated motor runs cooler and can run dry. Double strainer non-clogging protection. Compact, efficient and maintenance free. Moisture tight PTFE seals. Silent running, vibrationless w/anti-airlock feature. Ht resistant housing with a 5/16" stainless shaft and a nylon/fiberglass impeller. Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. Item# Description GPH Hose Volts Amps 29-02 Standard Series 1500 1 1/8" 12 4.8 29-10 Standard Series 2000 1 1/8" 12 8.4 HIGH CAPACITY MANUAL BILGE PUMPS

RkJQdWJsaXNoZXIy MTI2MTky