GENERAL BOATING WATERSPORTS & bOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & aNODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & fISHING ANCHORING/ mOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE Items are stocked in our warehouses based on regional demand. If an item is not in stock at a local warehouse, additional charges may apply. u - WARNING Cancer Causing See www.P65Warnings.ca.gov v - WARNING Reproductive Harm w - WARNING Cancer and Reproductive Harm ELECTRONICS 48 Item# Model Fits Cable 152-T70320 RV-312 6° - 18° Deadrise 33' Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. A 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. Built-in attitude and heading reference system (AHRS) stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. Includes a fast response water temperature sensor. Rugged plastic bodies suitable for fiberglass, steel or aluminum hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Kit Includes: Port & Starboard Transducers with 2-meter cables, Y-Cable, 8-meter (26') Transducer Extension Cable and Anti-rotation bolt kit. RV-312 REALVISION™ 3D PLASTIC THRU-HULL PACK Item# Model Cable 152-A80351 CPT-100DVS 33' Raymarine's exclusive line of DownVision transducers pair a conical CHIRP fishfinding element with a wide beam DownVision element. The result is an unrivaled level of subsurface visibility. Compatible with a68, a78, a98 & a128 multifunction displays. • Max Depth (Ft): DV=600 FF=900 • Beam Width (L/H): 25°/60° • Records: Depth / Temperature • Approved Hull Material: Fibreglass / Wood / Metal • Deadrise: 0-90° Transom • Replaces: A80270 TRANSOM MOUNT DOWNVISION TRANSDUCER Item# Description 152-E26028PZw Depth/Speed/Temp Multisensor features a 50/200 kHz, dual-frequency, singleceramic element. This hydrodynamic housing reduces turbulence under the face for accurate high-speed readings and clear images. Compatible with i40/i50 instuments. P66 TRANSOM MOUNT TRIDUCER Item# Description 152-A80373w P79S Smart™ In-Hull Transducer 152-T70278w P79S Smart™ In-Hull Transducer w/SeaTalkng Adapter • 235 kHz frequency • 6m (20’) NMEA 2000 cable • Devicenet connector • No holes to drill • Installation can be done in the water • Recommended for solid fiberglass hulls • Epoxies to aluminum hulls under 0.38 mm (0.150”) thick • Easily adapts to deadrise angles up to 22° Compatible with: ST40/ST60/i40/i50 on SeaTalk1 and i50 on STng - operate as repeaters only Note: a SeaTalk to SeaTalkng converter may be required. ST70, ST70+ and i70 on the SeaTalkng network are required for calibration P795S SMART™ TRANSDUCER Item# Description 152-E22079 with 162.50' (50m’) Cable Long arm wind, speed and angle tranducer compatible with i60, ST60 and ST60+ instruments. LONG ARM VANE TRANSDUCER The Raymarine T120 is a wireless wind transmitter for micronet displays. A typical installation can be done in just a few hours, with your rig in place and your boat still in the water. And there's no need for holes in the bulkhead or wires down the mast. The elimination of wires in the mast not only reduces spar weight but also lowers the boat's centre of gravity, giving significant and immediate performance advantage. Using clip-in cradles, your display can be placed anywhere on your boat, allowing you to view the information where and when you need it. Item# 152-T120 • Solar-Powered w/ 300 Hours Autonomy • Waterproof (submersible to 10m) • Simple Three-screw Attachment • Sends Data Via Wireless Link • Full Calibration Via Displays WIRELESS WIND TRANSDUCER Item# 152-A80007 HS5 SEATALKhs NETWORK SWITCH In use SeaTalkhs data is quickly distributed to other SeaTalkhs equipment using the HS5 switch. Information shared using the SeaTalkhs network includes shared cartography (between compatible displays), digital radar data and sonar data. • Dimensions:10" x 3.5" x 3" • Operating voltage range: 9 - 32 V dc • Power consumption: < 2.5 W < 600 mA @ 12 V • Waterproof to IPX6 • Supported connection speeds: 10 Mbit/S 100 Mbit/S 1000 Mbit/S Item# 152-T70134 SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. As your Raymarine system expands, so can your starter kit. Additional backbone cables, plugs and sockets can be added so you can connect more products via spur cables. Kit includes: • A06031: SeaTalkng Backbone Terminator (x2) • A06064: SeaTalkng 5-way Connector • A06040: SeaTalkng Spur Cable 3m • A06049: SeaTalkng Power Cable SEATALKng STARTER KIT Item# Description Length 152-A25062w STNG Backbone Kit (2 x A06031, 1 x A06037, 2 x A06036, 4 x A06028, 1 x A06049) 152-E22158 ST1 to STNG Adaptor Kit (1x R52131, 2x A06031, 2x A06032, 1x A22164, 1x A06049, 1x A06039) 152-A06034 Backbone Cable 1m 152-A06036 Backbone Cable 5m 152-A06045 DeviceNet (Female) Adaptor Cable 0.4m 152-A06084w DeviceNet (F) to STNG (M socket) Right Angle Adaptor STNG CABLES & COMPONENTS Item# Description Length 152-A80262w RayNet (M to F) Right Angle Adaptor 152-A62360 RayNet (F) to RJ45 (M) cable 1m 152-A62362 RayNet (F) to RayNet (F) cable 10m ST1 CABLES AND COMPONENTS 152-D284w SeaTalk Extension Cable 1m 152-D285w SeaTalk Extension Cable 3m NETWORK CABLES & COMPONENTS
RkJQdWJsaXNoZXIy MTI2MTky